Sensori di vibrazione
Sensori di vibrazione
Documenti da visualizzare/scaricare
Series Overview
The VSE series of vibration sensors provide measurement of overall vibration levels being generated by all types of machinery in Hazardous Areas.
They are available with either a IEPE/ICP voltage output for direct measurement and analysis of rotating machinery, or a loop powered 4-20mA output which can be directly connected to PLC, DCS and other industrial contollers for conitinuous condition monitoring.
The IEPE/ICP Voltage type are available with sensitivity of between 10mV/g (high frequency) to 500mv/g (low frequency).
The 4-20mA loop powered type are configured with a full scale acceleration output (RMS or Peak) of between 5g to 50g.
The housing is manufactured from 316L stainless steel, and is available either hardwired or with one of two wireable options (W or WL) which utilises our pioneering integrated junction box/connection head design. Euroswitch wireable vibration sensors alleviate add on components (glands,adaptors etc) and allow installation where space is at a premium.
Benefiting from state-of-the-art annular shear design, our VS series sensors provide better frequency response, improved base strain, lower noise, and an insensitivity to cable motion compared to the market competition.
The Vibration Sensor VSE Series is covered by the following hazardous area certifications.
Explosion Proof: | IECEx & ATEX Ex d/db/tb (Zone 1 & Zone 21) ¦ UL/CSA (Class I & II, Div1 & Div2) |
Intrinsically Safe: | IECEx & ATEX Ex ia (Zone 0 & Zone 20) ¦ UL/CSA IS (Zone 0) |
Other Regional Approvals Include: | EAC/TRCU, INMETRO, KCs, CCOE/PESO, ECAS ex, NEPSI/CQST |
- Forma corpo
- Cilindrico
- Materiale corpo
- Acciaio inossidabile 316L
- Ingresso condotto
- 1/2" - 14 NPT
- Filettatura di montaggio
- 1/4"-28 UNF Stud Mount (c/w 1/4"-28 UNF Stud)
- Tipo di elemento sensibile
- Taglio anulare piezoelettrico
- Uscita
- Accelerazione
- Tipo di uscita
- Tensione IEPE/ICP® Voltage (4 mA alimentazione CC)
- Risposta frequenza
- n/d
- Urto limite
- 2500g
- Linearità
- ±1% max
- Protezioni ESD
- > 40V
- Protezione ambientale
- IP 66, 67 & 68 (24hrs at 30m)/ NEMA 4, 4X, 6 & 6P
- Requisiti alimentazione
- CC da +2 a + 10 mA (da +22 a +28 V CC)
- Messa a terra
- Isolato dalla messa a terra macchina
- Schermatura
- Gabbia di Faraday interna
- Protezione
- Sovratensione e polarità inversa
- Massa
- 150g
Tutti i nostri prodotti sono disponibili anche per una posizione normale/applicazione industriale generale.
Seleziona la tua certificazione e il tuo concept di protezione per il tuo requisito specifico dal Builder del numero di parte di seguito