logo
International: +44 1283 575 811
North America: 281 909 4477

VSE-C321-J-WL-M20

by

The Vibration Sensor series of vibration sensors provide measurement of overall vibration levels being generated by all types of rotating machinery in Hazardous Areas, and can be directly connected to PLC, DCS and other industrial controllers.

The Vibration Sensor type are loop powered, 4-20mA output vibration sensors configured with a full scale acceleration output (RMS or Peak) of between 5g to 50g. The housing is manufactured from 316 stainless steel, and it is provided with a fully potted cable suitable for use in hazardous environments.

Benefiting from state-of-the-art annular shear design, our Vibration Sensor series sensors provide better frequency response, improved base strain, lower noise, and an insensitivity to cable motion compared to the market competition.

It is available certified for Hazardous Area use including ATEX / IECEx / UL / CSA / TRCU & INMETRO.

VSE-A322-B-WL-M20

by

The Vibration Sensor series of vibration sensors provide measurement of overall vibration levels being generated by all types of rotating machinery in Hazardous Areas, and can be directly connected to PLC, DCS and other industrial controllers.

The Vibration Sensor type are loop powered, 4-20mA output vibration sensors configured with a full scale acceleration output (RMS or Peak) of between 5g to 50g. The housing is manufactured from 316 stainless steel, and it is provided with a fully potted cable suitable for use in hazardous environments.

Benefiting from state-of-the-art annular shear design, our Vibration Sensor series sensors provide better frequency response, improved base strain, lower noise, and an insensitivity to cable motion compared to the market competition.

It is available certified for Hazardous Area use including ATEX / IECEx / UL / CSA / TRCU & INMETRO.

VSE-B322-O-W-M20

by

The Vibration Sensor series of vibration sensors provide measurement of overall vibration levels being generated by all types of rotating machinery in Hazardous Areas, and can be directly connected to PLC, DCS and other industrial controllers.

The Vibration Sensor type are loop powered, 4-20mA output vibration sensors configured with a full scale acceleration output (RMS or Peak) of between 5g to 50g. The housing is manufactured from 316 stainless steel, and it is provided with a fully potted cable suitable for use in hazardous environments.

Benefiting from state-of-the-art annular shear design, our Vibration Sensor series sensors provide better frequency response, improved base strain, lower noise, and an insensitivity to cable motion compared to the market competition.

It is available certified for Hazardous Area use including ATEX / IECEx / UL / CSA / TRCU & INMETRO.

VSE-D322-U-WL-M20

by

The Vibration Sensor series of vibration sensors provide measurement of overall vibration levels being generated by all types of rotating machinery in Hazardous Areas, and can be directly connected to PLC, DCS and other industrial controllers.

The Vibration Sensor type are loop powered, 4-20mA output vibration sensors configured with a full scale acceleration output (RMS or Peak) of between 5g to 50g. The housing is manufactured from 316 stainless steel, and it is provided with a fully potted cable suitable for use in hazardous environments.

Benefiting from state-of-the-art annular shear design, our Vibration Sensor series sensors provide better frequency response, improved base strain, lower noise, and an insensitivity to cable motion compared to the market competition.

It is available certified for Hazardous Area use including ATEX / IECEx / UL / CSA / TRCU & INMETRO.

VSE-D322-U-W-M20

by

The Vibration Sensor series of vibration sensors provide measurement of overall vibration levels being generated by all types of rotating machinery in Hazardous Areas, and can be directly connected to PLC, DCS and other industrial controllers.

The Vibration Sensor type are loop powered, 4-20mA output vibration sensors configured with a full scale acceleration output (RMS or Peak) of between 5g to 50g. The housing is manufactured from 316 stainless steel, and it is provided with a fully potted cable suitable for use in hazardous environments.

Benefiting from state-of-the-art annular shear design, our Vibration Sensor series sensors provide better frequency response, improved base strain, lower noise, and an insensitivity to cable motion compared to the market competition.

It is available certified for Hazardous Area use including ATEX / IECEx / UL / CSA / TRCU & INMETRO.

VSE-D322-U-WL

by

The Vibration Sensor series of vibration sensors provide measurement of overall vibration levels being generated by all types of rotating machinery in Hazardous Areas, and can be directly connected to PLC, DCS and other industrial controllers.

The Vibration Sensor type are loop powered, 4-20mA output vibration sensors configured with a full scale acceleration output (RMS or Peak) of between 5g to 50g. The housing is manufactured from 316 stainless steel, and it is provided with a fully potted cable suitable for use in hazardous environments.

Benefiting from state-of-the-art annular shear design, our Vibration Sensor series sensors provide better frequency response, improved base strain, lower noise, and an insensitivity to cable motion compared to the market competition.

It is available certified for Hazardous Area use including ATEX / IECEx / UL / CSA / TRCU & INMETRO.

+44 (0) 1283 575 811
[email protected]

The Euroswitch product range,
choose from over 5000 variations...

Need Help?

Not sure which product you require, please use our product configurator

Start Configurator
Queens Award logo

Proximity Switch - Ferrous

Euroswitch FS Series proximity switches are highly versatile. Utilising internal magnet technology enables them to sense ferrous materials such as carbon steel (17/4 or 400 series) at up to 2.5mm (0.1”). This can be increased with a magnetic actuator. Products are available with either dry contact volt-free SPCO/SPDT, DPCO/DPDT or 2-wire NAMUR output types and can operate within a wide range of voltages up to 240V, either AC or DC.

Need Help?

Not sure which product you require, please use our product configurator...

Start Configurator

FS-Series >

FS-A image
FS-A

M18 | 3.15"/80.0mm Long

PG9 Conduit Entry

Proximity Switch - Magnetic

Euroswitch ES Series proximity switches are highly versatile. Utilising a range of hermetically sealed switching elements, they require a magnetic actuator to operate, which enables them to have a larger sensing range of up to 125mm (5”) with a dry, volt-free contact with a multitude of contact forms including SPCO/SPDT, DPCO/DPDT, Latching, 2-wire NAMUR types that can operate within a wide range of voltages up to 240V either AC or DC.

Need Help?

Not sure which product you require, please use our product configurator

Start Configurator

ES-Series >

ES-0 image
ES-0

3.54"/90mm Long

1/2" NPT Conduit Entry

RS Series

The Euroswitch RS Series proximity switches Euroswitch RS Series switches are highly dependable, hermetically sealed position sensors. They require the use of a magnetic target to operate. Each model is manufactured specialised resins housed in industry-standard styles suitable for many use.

RS-Series >

RS-V1 Series image
RS-V1 Series

ATEX / IECEx Ex ia IIC/IIIC T6

65mm x 15mm x 25mm Rectangular

VI Series

Euroswitch VI Series modular valve indication packages, designed for the direct mount to quarter turn Namur actuators are ideally suited to the process industry, they also carry the latest intrinsically safe and explosion and encapsulation certification for Zone 0 & 1. Indication is available in a variety of ways both electrically and visually.

M-VIP-Series >

M-VIP image
M-VIP

Valve Position Switch

Rotary Valve Position Monitoring

SB Series

The Euroswitch Switchbox™ range provides users with unrivalled reliability & functionality delivering Precision valve monitoring for all valve & actuator combinations. Every Switchbox™ is capable of working in Hazardous and harsh applications environments, globally certified, and supplied with Multi Certification on each product, designed and tested to in excess of 1 million Life cycles.

SB-Series >

SB-XP1 image
SB-XP1

Multi-Approval Exd IIB +H2

Aluminium or Stainless Steel

FL Series

The Euroswitch FL Series ultra compact flow switch is designed and engineered to monitor liquid flow. Globally certified, they are used in some of the most arduous and hazardous applications around the world where a reliable signal is required.

Need Help?

Not sure which product you require, please use our product configurator

Start Configurator

FL-Series >

FL-A image
FL-A

Cabled Models

3/4" NPT Conduit Connection

VS Series

Euroswitch VS Series with state of the art, highly accurate annular shear design, Globally certified they are used in some of the most arduous and hazardous applications around the world. Euroswitch is able to offer an extensive range of vibration sensors including a choice of acceleration and velocity outputs.

Need Help?

Not sure which product you require, please use our product configurator

Start Configurator

VSE-Series >

VSE-A image
VSE-A

M6 stud mount

Acceleration or Velocity
4-20mA or IEPE/ICP Voltage

LS Series

The Euroswitch LS range of level switches and level indicators are available for reliable indication in general industrial applications and are approved for use in ATEX, IECEx, UL/CSA, TRCU and INMETRO hazardous zones.

LS-Series >

LS-A Series image
LS-A Series

Horizontal Mount

ATEX, IECEx, UL/CSA, TRCU and INMETRO Approvals

PS Series

The Euroswitch PS range of pressure switches are available for reliable indication in general industrial applications and are approved for use in ATEX, IECEx, UL/CSA, TRCU and INMETRO hazardous zones.

PS-Series >

PS Series image
PS Series

Static/Differential Pressure Sensing

Multi approved ATEX, IECEx, UL CSA, INMETRO, TRCU

JB Series

Euroswitch JB Series junction boxes have been designed using the latest materials and carry a full range of certification approvals. Our 75mm junction box is the smallest explosion proof junction box currently available on the market.

JB-Series >

JB-100 Series image
JB-100 Series

ATEX / IECEx / TRCU / EAC / KCs Exd IIC/IIIC T4/T5/T6

M20 Connection Type